/ Without Label / KONFIGURASI 2 ROUTER

Kamis, 10 Agustus 2017

KONFIGURASI 2 ROUTER




·  

       SETTING ROUTER 1
Router>en
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#int fa0/0
Router(config-if)#ip add 10.10.10.19 255.255.255.240
Router(config-if)#no shut
Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
Router(config-if)#exit
Router(config)#int fa0/1
Router(config-if)#ip add 10.1.1.19 255.255.255.240
Router(config-if)#no shut
Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up
Router(config-if)#exit
Router(config)#
Router con0 is now available
Press RETURN to get started.
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to down
Router>EN
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#int fa0/0
Router(config-if)#ip add 10.10.10.19 255.255.255.240
Router(config-if)#no shut
Router(config-if)#exit
Router(config)#int fa 0/1
Router(config-if)#ip add 192.168.1.2 255.255.255.0
Router(config-if)#no shut
Router(config-if)#exit
Router(config)#
Router con0 is now available
Press RETURN to get started.
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up
Router>en
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#ip route 10.1.1.16 255.255.255.248
% Incomplete command.
Router(config)#ip route 10.1.1.16 255.255.255.240 192.168.1.4 

·        
 SETTING ROUTER 2
Router>en
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#int fa0/0
Router(config-if)#ip add 10.1.1.19 255.255.255.240
Router(config-if)#no shut

Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router(config-if)#exit
Router(config)#int fa0/1
Router(config-if)#ip add 192.168.1.4 255.255.255.0
Router(config-if)#no shut

Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up

Router(config-if)#exit
 

Komentar

Related Posts

KONFIGURASI 2 ROUTER
4/ 5
Oleh

Langganan: Posting Komentar (Atom)